Wire For Making Iron Nails Production Line In India Wire Drawing
Machine
Wire Drawing Machine Introduction
The Wire Drawing Machine adopts PLC control system.It is easy to
operate.One worker can operate one hole production line. Wire
drawing machine uses water seal cooling system, so the temperature
of the machine will not to high, it is safe for the worker while
the machine is running in high speed.The machine adopts frequency
adjustable motor, the speed of the machine can be adjustable
according to your need.
Wire Drawing Machine Feature
The equipment is suitable for processing of 8mm or 6mm wire rod and
various kinds of metal wire, especially suitable for processing low
carbon iron wire, galvanized iron wire, copper wire, aluminum wire,
stainless steel wire, rubber hose steel wire, spring wire,welding
wire, etc. Use customed bold type reducer, thickening box body,
increase the bearing.Industrial lubricants are needed in the
process of machine production, which can lubricate raw materials
and machines. The wire produced is smooth
Wire Drawing Machine Parameter
Specs
(mm) | No.Of
Drafts | Max.
Inlet wire
(mm) | Min.
Outletwire
(mm) | Motor
Power
(KW) | Max.
Speed
(m/s) | Noise
dB(A) |
| 250 | 9-12 | 1.8 | 0.35 | 2.2-4 | 12 | 80-82 |
| 350 | 6-12 | 3.5 | 0.6 | 7.5-11 | 20 | 80-82 |
| 400 | 6-12 | 4.2 | 0.75 | 11-15 | 20 | 80-82 |
| 450 | 6-12 | 4.6 | 0.85 | 15-22 | 18 | 80-82 |
| 500 | 6-12 | 5.5 | 1.0 | 22-37 | 18 | 80-82 |
| 560 | 6-12 | 6.5 | 1.3 | 22-45 | 18 | 80-82 |
| 600 | 5-10 | 7.0 | 1.8 | 37-55 | 16 | 80-82 |
| 700 | 4-9 | 8.0 | 2.4 | 45-75 | 12 | 80-82 |
| 800 | 4-9 | 10 | 2.8 | 55-90 | 10 | 80-82 |
| 900 | 4-9 | 14 | 3.5 | 75-132 | 8 | 80-82 |
Wire Drawing Machine Display
Iron Wire Point Mill:This Machine is used to make the head of the
wire to mill.So it is easy to go through the wire moule die.
Wire Butt Welder:This Machine is used to weld the head of the wire
coil together. To a great extent, raw materials are saved.
Wire Rod Drawing Machine Finish Product
